*Masato WAKEDA¹, Shigenobu OGATA² (1. National Institute for Materials Science(Japan), 2. Osaka University(Japan))

*Ryosuke Shioda¹, Tsuyoshi YOSHIDA¹, Tokujiro YAMAMOTO¹, Yoshihiro EBISU³, Toru OZAKI³, Koji KIMURA², Kouichi HAYASHI², Naohisa HAPPO⁴, Shinya HOSOKAWA⁵ (1. Utsunomiya University(Japan), 2. Nagoya Institute of Technology(Japan), 3. Hiroshima Institute of Technology(Japan), 4. Hiroshima City University(Japan), 5. Kumamoto University(Japan))

*Keita MORIYA¹, Teruo BITOH¹ (1. Akita Prefectural University(Japan))

*Maki SATAKE¹, Teruo BITOH¹ (1. Akita Prefectural University(Japan))

*Ryota Ito¹, Takamasa Yoshikawa¹, Tadashi Inaba¹ (1. Department of Mechanical Engineering, Mie University, 1577 Kurima-machiya-cho, Tsu 514-8507(Japan))

*Toshiyuki DOI¹, Tohru YAMAZAKI¹, Hidemi KATO² (1. Graduate School of Engineering, University of Hyogo (Japan), 2. Institute for Materials Research, Tohoku University(Japan))

S. Y. Kim¹, J. W. Kim¹, K. Nakayama², *Eun Soo Park¹ (1. Seoul National University(Korea), 2. Tohoku University(Japan))

*Tohru YAMASAKI¹, Toshiyuki DOI², Kazutaka FUJITA³, Hidemi KATO⁴ (1. Department of Materials and Synchrotron Radiation Engineering, Graduate School of Engineering, University of Hyogo(Japan), 2. Graduate Student, University of Hyogo(Japan), 3. Department of Mechanical Engineering, National Institute of Technology, Ube College(Japan), 4. Institute for Materials Research, Tohoku University(Japan))

*Chihiro KISAKI¹, Kazutaka FUJITA², Yoshikatu YAMAZAKI², Kenji AMIYA³, Tohru YAMASAKI⁴, Hidemi KATO⁵ (1. Advanced Production System Engineering Course student, National Institute of Technology, Ube College(Japan), 2. Department of Mechanical Engineering, National Institute of Technology, Ube College(Japan), 3. Institute for Materials Research, Trans-Regional Corporation Center for Industrial Materials Research, Tohoku University(Japan), 4. Research Center for Nano-Micro Structure Science and Engineering, Graduate School of Engineering, University of Hyogo(Japan), 5. Institute for Materials Research, Tohoku University(Japan))

*JING JIANG¹, Hidemi KATO², Dmitri V LOUZGUINE-LUZGIN³ (1. Graduate School of Engineering , Tohoku University.(Japan), 2. Institute for Materials Research, Tohoku University.(Japan), 3. Advanced Institute for Materials Research, Tohoku University.(Japan))

*Koichi TSUCHIYA^1,2, Jian QIANG^1,2, Shinji KOHARA¹, Yohei ONODERA^3,1, Osami SAKATA¹ (1. National Institute for Materials Science(Japan), 2. Univesity of Tsukuba(Japan), 3. Kyoto University(Japan))

*Junji SAIDA¹, Wei GUO, Rui YAMADA (1. Tohoku University(Japan))

*Nozomu Adachi¹, Yoshikazu Todaka¹ (1. Toyohashi University of Technology(Japan))

*Teruo BITOH¹, Takafumi HIBINO^1,2, Hisato KOSHIBA³ (1. Akita Prefectural University(Japan), 2. Present affiliation: Hitachi Industrial Equipment Systems Co., Ltd.(Japan), 3. Alps Electric Co., Ltd.(Japan))

*Tokujiro YAMAMOTO¹, Eishi KOIKE¹, Kazuya SUDO¹ (1. Utsunomiya University(Japan))

*Kenji Amiya¹, Yasunori Saotome², Noboru Shimada³, Atsushi Okuma³, Hidechika Shiratori³, Hiroyasu Mabuse¹ (1. Trans-Regional Corporation Center, Institute Material Research, Tohoku University(Japan), 2. MGA Research Laboratory(Japan), 3. Porite Co., Ltd(Japan))

*Guoqiang XIE^1,2,3, Fengxiang QIN⁴, Hiroyasu KANETAKA^2,3 (1. Shenzhen Graduate School, Harbin Institute of Technology, Shenzhen 518055(China), 2. Graduate School of Dentistry, Tohoku University, Sendai 980-8575(Japan), 3. Graduate School of Biomedical Engineering, Tohoku University, Sendai 980-8579(Japan), 4. School of Materials Science and Engineering, Nanjing University of Science and Technology, Nanjing 210094(China))

*Ai NOZAKI¹, Tasuku YASUOKA², Yasutaka KUWAHARA², Tetsutaro OHMICHI², Kohsuke MORI², Hiromi YAMASHITA² (1. University of Hyogo(Japan), 2. Osaka University(Japan))