第39回コンクリート工学講演会

Bond, Anchorage & Joint Ⅰ

Wed. Jul 12, 2017 1:15 PM - 3:15 PM Room 7 (Meeting Room 1 / Exhibition Building 1F)

座長:滝本和志(土木), 寺井雅和(建築)

+Add all to schedule

[2075] Experimental Study on Bonding Length of Reinforcing Bars in Cutting Groove with PCM Jacketing Method

Masaya ISHIMURA¹, Shinichi HINO¹, Hiroyuki YANAGA², Keitarou KONUMA³ (1.九州大学 2.　アーテック 3.パシフィックコンサルタンツ)

[2076] Influence of embedment length on flexural load bearing performance and fracture behavior of jointed beam specimen whose primary reinforcement was constructed by post-installed anchor

Yasutaka NOMA¹, Yasushi ARAI², Hiroyuki MINAKAMI³, Tsuyoshi NISHIMURA¹ (1.安藤ハザマ 2.東京地下鉄 3.メトロ開発)

[2077] Pull-out test of post-installed reinforcing bar for RC structure joint

Sumiyuki SAWADA¹, Yasushi ARAI², Hiroyuki MINAKAMI³, Yuji MURAKAMI¹ (1.安藤ハザマ 2.東京地下鉄 3.メトロ開発)

[2078] Effects of edge distance and anchor spacing on strength degradation of post-installed bonded anchor

Hiroaki MIKURA¹, Toshiya TADOKORO¹, Masaru OKAMOTO¹, Yuichiro RYU² (1.鉄道総合技術研究所 2.九州旅客鉄道)

[2079] Shear behavior of RC beam with mortar grouted sleeve joints and interface

Takanori MORI¹, Takuro NAKAMURA¹, Toshio MATSUMOTO², Junichiro NIWA¹ (1.東京工業大学 2.日本スプライススリーブ)

[2080] BOND SPLITTING STRENGTH OF BEAMS WITH LOW QUALITY RECYCLED AGGREGATE CONCRETE ADDING VINYLON FIBER

Noritaka MOROHASHI¹, Yuuki HINO¹, Atsuhisa OGAWA² (1.日本大学 2.クラレ)

[2081] Experiment of T-shaped Beam-Column joints with Different Amount of Lateral Reinforcement at Mechanical Anchor Head

Katsunari MURAI¹, Satoru ICHIKAWA¹, Yasushi SANADA¹, Alpha Oumar Bagou Bah¹ (1.大阪大学)

[2082] Finite Element Analysis of Reinforced Concrete Beam-Column Joint with Slab

Kuniyoshi SUGIMOTO¹, Akira TASAI¹ (1.横浜国立大学)

第39回コンクリート工学講演会

Bond, Anchorage & Joint Ⅱ / Structural analysis / Fracture mechanics

Wed. Jul 12, 2017 3:45 PM - 6:15 PM Room 7 (Meeting Room 1 / Exhibition Building 1F)

座長:下村匠(土木), 田才晃(建築)

+Add all to schedule

[2083] A Study of Load Bearing Mechanism of RC Box Culvert Corner Installed United-Rebar

Takahiko WATANABE¹, Yasuhiko INOGUTI¹, Katuhiko TAKAKURA¹, Hirosi MURATA¹ (1.大成建設)

[2084] Experimental study on bond performance between concrete and bamboo-rebar

Masakazu TERAI (近畿大学)

[2009] Estimation of indoor damage during earthquakes in mid-to-high-rise building

Tatsuya HAYASHI¹, Taishi SHIRAISHI¹, Yusuke MAIDA¹, Nobuyuki IZUMI¹ (1.千葉大学)

[2010] Evaluation of Long-term Behavior of RC Beam and Column by 3D-FE Analysis and Its Application to High-rise Building

Masayuki HORIKAWA¹, Kazushige ASARI¹, Syunya KATO¹, Kazuhiro NAGANUMA¹ (1.日本大学)

[2011] PROPOSAL OF LOCAL INDEX FOR DAMAGE EVALUATION OFRC BEAM FAILED IN SHEAR AND FLEXURE MODE

Tatek Yenehun LEMLEM¹, Hikaru NAKAMURA², Taito MIURA², Takahiro NANRI² (1.Nagoya University 2.名古屋大学)

[2012] Simulation of Post-Peak Behavior of RC members using Three dimensional RBSM with Geometric Nonlinear Reinforcement Model

Yuu ISAJI¹, Yoshihito YAMAMOTO¹, Hikaru NAKAMURA¹, Taito MIURA¹ (1.名古屋大学)

[2013] Evaluation of load-carrying capacity of rigid-frame viaducts with considering the amount of reinforcing bars corrosion and corrosion area

Koji SATO¹, Ken WATANABE¹, Toshiya TADOKORO¹ (1.鉄道総合技術研究所)

[2014] Investigation on modeling techniques for RC frame with walls due to static non-linear incremental analysis

Yuma KAWAGOE¹, Tomohisa MUKAI², Hideyuki KINUGASA³ (1.東京理科大学 2.建築研究所 3.東京理科大学)

[2015] Compressive strength characteristics of concrete cylinder specimens with micro-discontinuities

Shiho OGAKI¹, Shigehiko SAITO¹, Tadatomo WATANABE² (1.山梨大学 2.北武コンサルタント)

[2016] Fundamental Study on Surface Strain Measurement under Compressive for Cracked Concrete Stress by Alkali-Silica Reaction

Shotaro HOSHINO¹, Tomohiro MIKI¹ (1.神戸大学)

Sessions

B.Structural & Design » Bond, Anchorage & Joint / Structural analysis / Fracture mechanics