General Session

[G] Biomaterials Development and Clinics(1)

Tue. Mar 17, 2020 1:00 PM - 3:10 PM Rm. L (W641,4th Flr., West Lecture Bldg.2)

Chair:Mitsuo Niinomi(Tohoku University)

※表示の講演時間には質疑応答時間も含みます。
（質疑応答時間５分、基調講演と外国人特別講演は5～10分）

+Add all to schedule

1:00 PM - 1:15 PM

[266] Development of Ti-Nb-Ta-Zr-Mo high entropy allloys for metallic biomaterials

*TODAI Mitsuharu¹, KAWABORI Tstsuru¹, NAGASE Takakeshi², NAKANO Takayoshi² (1. National Institute of Technology, Niihama College, 2. Osaka University)

1:15 PM - 1:30 PM

[267] Effect of oxygen addition on discontinuous precipitation behavior in Ti-4at%Mo alloy

*horiguchi tomohiro¹, kobayashi sengo², okano satoshi² (1. 愛媛大理工（院生）、2. 愛媛大理工)

1:30 PM - 1:45 PM

[268] Sn addition effect to ω transformation in β type Ti alloys

*Abe Ryota¹, Hayashi Tomoki¹, Luckabauer Martin², Okamoto Norihiko², Ichitsubo Tetsu² (1. Tohoku Univ. Graduate School of Engineering, 2. Tohoku Univ. IMR)

1:45 PM - 2:00 PM

[269] Effect of solid solution treatment on quenched-in microstructure of Ti-Nb-O Alloys

*KOBAYASHI Sengo¹, MURAKAMI Taigo², KOBAYASHI Mai³, OKANO Satoshi¹ (1. Ehime University, 2. Ehime University, 3. Ehime University)

Break （2:00 PM - 2:10 PM）

2:10 PM - 2:25 PM

[270] Microstructure and mechanical properties of Ti-6Al-7Nb alloy by high-pressure sliding in reciprocating motion

*ASHIDA Maki¹, OTSUKA Eiichi¹, CHEN Peng¹, TAKIZAWA Yoichi², YUMOTO Manabu², OTAGIRI Yoshiharu², HORITA Zenji³, HANAWA Takao¹ (1. Inst. of Biomaterial and Bioengineering, Tokyo Medical and Dental Univ., 2. Nagano Forging Co., Ltd, 3. Kyushu Inst. of Technology)

2:25 PM - 2:40 PM

[271] The effect of heating rate and oxygen addition on α" phase during heating process of Ti-Nb alloys.

*SASAKI Renta¹, KOBAYASHI Sengo¹, OKANO Satoshi¹ (1. Ehime-university)

2:40 PM - 2:55 PM

[272] Interfacial Analysis between Corals and Titanium-based Scaffolds

*SAWATARI Chihiro¹, UEDA Masato², IKEDA Masahiko² (1. Kansai Univ. (B4), 2. Kansai Univ.)

2:55 PM - 3:10 PM

[273] Evaluation for water insoluble anticancer agent carrying ability of core/shell particles

*LEE Sungho¹, NAGATA Fukue¹, KATO Katsuya¹ (1. National Institute of Advanced Industrial Science and Technology (AIST))

General Session

[G] Biomaterials Development and Clinics(2)

Wed. Mar 18, 2020 9:00 AM - 12:00 PM Rm. L (W641,4th Flr., West Lecture Bldg.2)

座長:野村直之(東北大学)、久森紀之(上智大学)、池尾直子(神戸大学)

9：00～　野村
9：55～　久森
11:15～　池尾

※表示の講演時間には質疑応答時間も含みます。
（質疑応答時間５分、基調講演と外国人特別講演は5～10分）

+Add all to schedule

9:00 AM - 9:30 AM

[274] [功績賞受賞講演] Elucidation of bone function, and development of metallic biomaterial for bone application, based on science and engineering for metal materials

*ISHIMOTO Takuya¹ (1. Osaka Univ.)

9:30 AM - 9:45 AM

[275] Effect of microstructure on in vitro fatigue properties in Mg-Zn alloy

*Ikeo Naoko¹, KAWAMURA Naoya², MUKAI Toshiji¹ (1. KOBE Univ., 2. KOBE Univ. (M2))

Break （9:45 AM - 9:55 AM）

9:55 AM - 10:10 AM

[276] Anisotropic Function Design by Simultaneous Control of Shape, Material and Configuration through 3D Printing

*MORITA Naotaka¹, ISHIMOTO Tkakuya², KIMURA Kouta², NAKANO Takayoshi² (1. Osaka Univ. (School of Engineering), 2. Osaka Univ. (Graduate School of Engineering))

10:10 AM - 10:25 AM

[277] Precipitation behavior during reverse transformation treatment in biomedical Co-Cr-Mo alloys fabricated by electron beam melting

*Ueki Kosuke¹, Kasamatsu Motoka², Ueda Kyosuke³, Koizumi Yuichiro⁴, Wei DaiXiu⁵, Chiba Akihiko⁵, Narushima Takayuki^3,6 (1. Faculty of Science and Engineering, Kindai University, 2. Graduate school of Engineering, Tohoku University (graduate student), 3. Graduate school of Engineering, Tohoku University, 4. Graduate School of Engineering, Osaka University, 5. Institute for Materials Research, Tohoku University, 6. Institute for Materials Science (NIMS))

10:25 AM - 10:40 AM

[278] Fabrication of molybdenum builds by laser powder bed fusion
using FD-POEMed powder

*GUO Suxia¹, ZHOU Zhenxing¹, ZHOU Weiwei¹, NOMURA Naoyuki¹ (1. Mat. Sci. &Mat. Proc., Tohoku Univ.)

10:40 AM - 10:55 AM

[279] Control of microstructure and mechanical properties of Hastelloy-X by selective laser melting

*TODO Tsubasa¹, ISHIMOTO Takuya², KIMURA Kota², GOKCEKAYA Ozkan², HIBINO Shinya³, FUJIMITSU Kazushige³, AZUMA Makoto³, IGASHIRA Kenichiroh³, NAKANO Takayoshi² (1. Osaka Univ. (M1), 2. Osaka Univ., 3. KHI)

10:55 AM - 11:10 AM

[280] Melt pool dynamics in electron beam additive manufacturing process

ZHAO Yufan¹, AOYAGI Kenta¹, CUI Yujie¹, BIAN Huakang¹, YAMANAKA Kenta¹, *CHIBA Akihiko¹ (1. Institute for Materials Research, Tohoku University)

Break （11:10 AM - 11:15 AM）

11:15 AM - 11:30 AM

[281] Effect of aging heat treatment on microstructure and hardness of Zr-14Nb-5Ta-1Mo alloy

*GAO Qianyu¹, ASHIDA Maki², NOMURA Naoyuki³, CHEN Peng², HANAWA Takao² (1. Graduate School of Medical and Dental Sciences, 2. Institute of Biomaterial and Bioengineering, 3. Tohoku University)

11:30 AM - 11:45 AM

[gam] Fabrication of low magnetic graphene/Al matrix composites with improved strength

*ZHOU Weiwei¹, KUBOTA Korefumi², ONO Hironobu², NOMURA Naoyuki¹, KAWASAKI Akira¹ (1. Tohoku Univ.、2. Nippon Shokubai Co., LTD)

11:45 AM - 12:00 PM

[283] Microstructure and Mechanical Properties of AuCuAlB Biomedical Shape Memory Alloys

*Umise Akira^1,2, Yamaji Koki³, Goto Kenji⁴, Tahara Masaki¹, Hanawa Takao², Hosoda Hideki¹ (1. Institute of Innovative Research (IIR), Tokyo Institute of Technology, 2. Institute of Biomaterials and Bioengineering (IBB), Tokyo Medical and Dental University, 3. Tokyo Institute of Technology (Present: Kobe Steel), 4. TANAKA KIKINZOKU KOGYO K.K.)

Sessions

7.Biomedical and Health Care » Biomaterials Development and Clinics