Oral presentation

[19p-C206-1~10] 11.3 Critical Current, Superconducting Power Applications

Thu. Sep 19, 2019 1:15 PM - 4:00 PM C206 (C206)

Tetsuro Sueyoshi(Kumamoto Univ.), Noriko Chikumoto(Chubu Univ.)

△：Presentation by Applicant for JSAP Young Scientists Presentation Award
▲：English Presentation
▼：Both of Above
No Mark：None of Above

+Add all to schedule

1:15 PM - 1:30 PM

[19p-C206-1] [Highlight] Depairing Current Density and Pining Current Density —REBCO and MgB₂—

〇Teruo Matsushita¹, Masaru Kiuchi¹, Masashi Miura² (1.Kyushu Inst. Tech., 2.Seikei Univ.)

1:30 PM - 1:45 PM

[19p-C206-2] Flux-flow simulation by the explicit integrator using the checkerboard-decomposition and pairs of conjugate Affine transformations

〇Tetsuya Matsuno¹ (1.Ariake college)

1:45 PM - 2:00 PM

[19p-C206-3] Competing flux pinning of columnar defects around ab-plane in high-T_c superconductors

〇Tetsuro Sueyoshi¹, Yuka Hidaka¹, Ryusei Enokihata¹, Hiroshi Yamaguchi¹, Takanori Fujiyoshi¹, Akane Kitamura², Yasuki Okuno², Norito Ishikawa² (1.Kumamoto Univ., 2.JAEA)

2:00 PM - 2:15 PM

△ [19p-C206-4] Crystallinities and Superconducting Properties of thickened BaHfO₃-doped YBa₂Cu₃O_yCoated Conductors in High Deposition Rate prepared by Vapor-Liquid-Solid Growth technique.

〇Tomohiro Ito¹, Kento Yasuda¹, Yuji Tsuchiya¹, Yusuke Ichino¹, Ataru Ichinose², Satoshi Awaji³, Yutaka Yoshida¹ (1.Nagoya Univ., 2.CRIEPI, 3.Tohoku Univ.)

2:15 PM - 2:30 PM

[19p-C206-5] Enhanced Asymmetric Critical Current Properties in Surface-Treated REBCO Films

〇Yuji Tsuchiya¹, Keisuke Suzuki¹, Akihiro Tsuruta², Woosuck Shin², Yusuke Ichino¹, Yutaka Yoshida¹ (1.Nagoya Univ., 2.AIST)

2:45 PM - 3:00 PM

[19p-C206-6] Change of joint resistivity by peak power at joining in sonic welding of Cu-stabilized REBCO coated conductors

〇Takumi Suzuki¹, yudai Onitsuka¹, Kohei Higashikawa¹, Takahiro Ito², Ryoichi Ishii², Shigeru Sato², Takanobu Kiss¹ (1.Kyushu University, 2.ULTEX)

3:00 PM - 3:15 PM

[19p-C206-7] The development of superconducting joint technologies for MgB₂ wires

〇MATSUMOTO AKIYOSHI¹, DIPAK PATEL¹, YUKA HARA¹, TORU HARA¹, HIROAKI KUMAKURA¹ (1.NIMS)

3:15 PM - 3:30 PM

△ [19p-C206-8] Characterization of Local Critical Current Density Distribution in NbTi-Bi2223 Superconducting Joints with Different Solders Based on Magnetic Microscopy

〇Zeyu Wu¹, Kohei Higashikawa¹, Ryo Matsumoto², Yoshihiko Takano², Takanobu Kiss¹ (1.Kyushu Univ., 2.NIMS)

3:30 PM - 3:45 PM

△ [19p-C206-9] Superconducting joint between Ba_1-xK_xFe₂As₂ tapes by using a cold-press technique

〇Shota Imai^1,2, Shigeyuki Ishida², Yoshinori Tsuchiya², Akira Iyo², Hiroshi Eisaki², Taichiro Nishio¹, Yoshiyuki Yoshida² (1.TUS, 2.AIST)

3:45 PM - 4:00 PM

[19p-C206-10] Current distribution measurement at solder joint and superconducting cable using a scanning Hall sensor

〇Noriko Chikumoto¹, Satarou Yamaguchi¹, Oleg Shyshkin² (1.Chubu Univ., 2.V.N. Karazin National Univ.)

Sessions

11 Superconductivity » 11.3 Critical Current, Superconducting Power Applications

[19p-C206-1~10] 11.3 Critical Current, Superconducting Power Applications

[19p-C206-1] [Highlight] Depairing Current Density and Pining Current Density —REBCO and MgB₂—

[19p-C206-2] Flux-flow simulation by the explicit integrator using the checkerboard-decomposition and pairs of conjugate Affine transformations

[19p-C206-3] Competing flux pinning of columnar defects around ab-plane in high-T_c superconductors

△ [19p-C206-4] Crystallinities and Superconducting Properties of thickened BaHfO₃-doped YBa₂Cu₃O_yCoated Conductors in High Deposition Rate prepared by Vapor-Liquid-Solid Growth technique.

[19p-C206-5] Enhanced Asymmetric Critical Current Properties in Surface-Treated REBCO Films

[19p-C206-6] Change of joint resistivity by peak power at joining in sonic welding of Cu-stabilized REBCO coated conductors

[19p-C206-7] The development of superconducting joint technologies for MgB₂ wires

△ [19p-C206-8] Characterization of Local Critical Current Density Distribution in NbTi-Bi2223 Superconducting Joints with Different Solders Based on Magnetic Microscopy

△ [19p-C206-9] Superconducting joint between Ba_1-xK_xFe₂As₂ tapes by using a cold-press technique

[19p-C206-10] Current distribution measurement at solder joint and superconducting cable using a scanning Hall sensor

Authentication

Sessions

11 Superconductivity » 11.3 Critical Current, Superconducting Power Applications

[19p-C206-1~10] 11.3 Critical Current, Superconducting Power Applications

[19p-C206-1] [Highlight] Depairing Current Density and Pining Current Density —REBCO and MgB2—

[19p-C206-2] Flux-flow simulation by the explicit integrator using the checkerboard-decomposition and pairs of conjugate Affine transformations

[19p-C206-3] Competing flux pinning of columnar defects around ab-plane in high-Tc superconductors

△ [19p-C206-4] Crystallinities and Superconducting Properties of thickened BaHfO3-doped YBa2Cu3OyCoated Conductors in High Deposition Rate prepared by Vapor-Liquid-Solid Growth technique.

[19p-C206-5] Enhanced Asymmetric Critical Current Properties in Surface-Treated REBCO Films

[19p-C206-6] Change of joint resistivity by peak power at joining in sonic welding of Cu-stabilized REBCO coated conductors

[19p-C206-7] The development of superconducting joint technologies for MgB2 wires

△ [19p-C206-8] Characterization of Local Critical Current Density Distribution in NbTi-Bi2223 Superconducting Joints with Different Solders Based on Magnetic Microscopy

△ [19p-C206-9] Superconducting joint between Ba1-xKxFe2As2 tapes by using a cold-press technique

[19p-C206-10] Current distribution measurement at solder joint and superconducting cable using a scanning Hall sensor

Authentication

[19p-C206-1] [Highlight] Depairing Current Density and Pining Current Density —REBCO and MgB₂—

[19p-C206-3] Competing flux pinning of columnar defects around ab-plane in high-T_c superconductors

△ [19p-C206-4] Crystallinities and Superconducting Properties of thickened BaHfO₃-doped YBa₂Cu₃O_yCoated Conductors in High Deposition Rate prepared by Vapor-Liquid-Solid Growth technique.

[19p-C206-7] The development of superconducting joint technologies for MgB₂ wires

△ [19p-C206-9] Superconducting joint between Ba_1-xK_xFe₂As₂ tapes by using a cold-press technique