Oral presentation

[9p-S321-1~15] 1.4 Energy conversion, storage, resources and environment

Sat. Mar 9, 2019 1:45 PM - 6:00 PM S321 (S321)

Kazuya Oguri(Tokai Univ.), Masashi Sato(Tokai Univ.), Kazuhiro Hara(Kyushu Univ.)

△：Presentation by Applicant for JSAP Young Scientists Presentation Award
▲：English Presentation
▼：Both of Above
No Mark：None of Above

+Add all to schedule

1:45 PM - 2:00 PM

[9p-S321-1] Development of carbonate hydrogen storage material

〇(M2)HENG LI¹, Keiji Komatsu¹, Atsushi Nakamura^2,1, Osamu Ito², Keiki Nambu³, Hidetoshi Saitoh¹ (1.Nagaoka Univ.Tech., 2.Chubu Chelest Co., Ltd., 3.ACCHE Corporation)

2:00 PM - 2:15 PM

[9p-S321-2] Measurement of specific surface area of pearl powder by hydrogen adsorption

〇Yunosuke Takatoku¹, Heng Li¹, Keiji Komatsu¹, Atsushi Nakamura^2,1, Osamu Ito², Keiki Nambu³, Hidetoshi Saitoh¹ (1.Nagaoka Univ. of Tech., 2.Chubu Chelest Co., Ltd., 3.ACCHE Corporation)

2:15 PM - 2:30 PM

[9p-S321-3] Synergic Effects of Heavy Ion Irradiation and Surface Chemistry Processing for Hydrogen Absorption Functionally Improvement

〇Hiroshi Abe¹, Shigeo Aone², Ryo Morimoto², Hirohisa Uchida² (1.QST-QuBS, 2.Tokai Univ.)

2:30 PM - 2:45 PM

[9p-S321-4] H Adsorption on Cs/W(110): H-induced Cs Desorption

Allan Abraham Bustria Padama¹, 〇Wilson Agerico Tan Dino^2,3, Motoi Wada⁴, Katsuyoshi Tsumori⁵, Masashi Kisaki⁵, Hideaki Kasai⁶, Hiroshi Nakanishi⁶, Mamiko Sasao⁷, Nozomi Tanaka⁸ (1.IMSP-UPLB, 2.AP Osaka Univ., 3.CAMT Osaka Univ., 4.GSE Doshisha Univ., 5.NIFS, 6.NITAC, 7.R&D Doshisha Univ., 8.ILE Osaka Univ.)

2:45 PM - 3:00 PM

▲ [9p-S321-5] Radiation graft copolymerization of phosphorous containing monomer on CMC-based hydrogel for metal adsorption

〇(D)Tran Thu Hong¹, Okabe Hirotaka¹, Hidaka Yoshiki¹, Hara Kazuhiro¹ (1.Kyushu University)

3:15 PM - 3:30 PM

[9p-S321-6] Hydrogen occlusion mechanism and application to hydrogen sensor of Au - Pd alloy

〇takuma kurotsu¹, naoki yamasaku¹, shinji okazaki¹, taro arakawa¹, yoshiaki nishijima¹, Armandas Balcytis², Saulius Juodkazis² (1.Yokohama National Univ., 2.Swinburne Univ.)

3:30 PM - 3:45 PM

▲ [9p-S321-7] Hydrogen generation by water splitting using TiO₂ and 3C-SiC in tandem structure

〇(M1)Zhenhang Liu¹, Masashi Kato¹ (1.NITech)

3:45 PM - 4:00 PM

▲ [9p-S321-8] Electrodeposition of nanostructured Si-layer on graphite substrate for application as anode-materials in lithium-ion-battery

〇Muhammad Monirul Islam¹, Hajer Said^1,2, Katsuhiro Akimoto¹, Hichem Hamzaoui Ahmed², Naoki Fukata^1,3, Takeaki Sakurai¹ (1.Tsukuba Univ., 2.Univ. Tunis-El-Mann., 3.NIMS)

4:00 PM - 4:15 PM

△ [9p-S321-9] Realization of an efficient CO₂ reduction using an optical near-field assisted excitation of dipole-forbidden transition

〇Yuki Nakamura¹, Tatsuki Morimoto², Yuma Kato³, Tomoko Yoshida³, Nobuyuki Shimizu⁴, Wataru Kurashige⁴, Yuichi Negishi⁴, Kenji Iida⁵, Takashi Yatsui¹ (1.Univ. Tokyo, 2.Tokyo Univ. Tech., 3.Osaka City Univ., 4.Tokyo Univ. Sci., 5.IMS)

4:15 PM - 4:30 PM

[9p-S321-10] Synthesis of Iron Disilicide/SiC Composite Powder for Water Splitting

〇Kensuke Akiyama^1,2, Sakiko Nojima¹, Ryo Takahashi¹, Hiroshi Funakubo², Hiroshi Irie³ (1.Kanagawa Inst. Ind. Sci. Tech., 2.Tokyo Inst. Tech., 3.Univ. Yamanashi)

4:45 PM - 5:00 PM

[9p-S321-11] Air bio-battery with glucose-driven O₂ charger

〇Zaichen Hao¹, Fumiya Seshima¹, Takeru Sugiyama¹, Koji Toma¹, Takahiro Arakawa¹, Kohji Mitsubayashi¹ (1.Tokyo Medical and Dental Univ.)

5:00 PM - 5:15 PM

[9p-S321-12] Theory on Electrode Over Potential of All-Solid Electrochemical Energy Device

〇Kiyoshi Kobayashi¹, S. Tohru Suzuki¹ (1.NIMS)

5:15 PM - 5:30 PM

[9p-S321-13] Analysis of the reaction mechanism of a bismuth fluoride electrode for fluoride shuttle battery

〇Taketoshi Minato¹, Hiroaki Konishi¹, Hiroshi Onishi², Takeshi Abe³, Zempachi Ogumi¹ (1.SACI, Kyoto Univ., 2.Depart. Chem.,Kobe Univ., 3.Grad. Sch. Global Env. Stud.,Kyoto Univ.)

5:30 PM - 5:45 PM

[9p-S321-14] Fabrication of semiconductor solid state battery with quantum well structure and evaluation of charge/discharge characteristics

〇Atsuya Sasaki¹, Akito Sasaki¹, Yoshinori Kataoka¹, Takahiro Ito², Hideaki Hirabayashi¹ (1.Toshiba Mat., 2.Geomatec)

5:45 PM - 6:00 PM

[9p-S321-15] Morphology changes of SiO_x film anodes in different oxygen contents for lithium-ion batteries

〇Masakazu Haruta¹, Takayuki Doi¹, Minoru Inaba¹ (1.Doshisha Univ.)

Poster presentation

[11p-PA3-1~10] 1.4 Energy conversion, storage, resources and environment

Mon. Mar 11, 2019 1:30 PM - 3:30 PM PA3 (PA)

△：Presentation by Applicant for JSAP Young Scientists Presentation Award
▲：English Presentation
▼：Both of Above
No Mark：None of Above

+Add all to schedule

1:30 PM - 3:30 PM

[11p-PA3-1] Photorechargeable properties of WO₃/FTO core-sheath nanofibers

〇(M1)Taito Kumamoto¹, Takuya Matsuda¹, Taichi Komaki¹, Makoto Shozaki¹, Teruaki Nomiyama¹, Yuji Horie¹ (1.Kagoshima Univ.)

1:30 PM - 3:30 PM

[11p-PA3-2] Application of Ce-doped BiFeO₃ thin film to photoelectric conversion in photorechargeable battery

〇(M1)Seiga Ueno¹, Koki Matoba¹, Teruaki Nomiyama¹, Yuji Horie¹ (1.Kagoshima Univ.)

1:30 PM - 3:30 PM

[11p-PA3-3] Integration of Bacteria using Light-Induced Convection and Application to Microbial Fuel Cells

〇Kenji Sakurai^1,3, Ryo Yoshikawa^1,3, Taichi Suehiro^2,3, Yasuyuki Yamamoto^2,3, Olaf Karthaus⁴, Takuya Iida^2,3, Shiho Tokonami^1,3 (1.Grad.Sch.Eng.of Osaka Pref.Univ., 2.Grad.Sch.Sci.of Osaka Pref.Univ., 3.RILACS, 4.Grad.Sch.Sci.of Chitose Ins.Univ.)

1:30 PM - 3:30 PM

▲ [11p-PA3-4] Lithium, Sodium and Magnesium Insertion in Brookite TiO₂: a Comparative Computational Study

Daniel Koch¹, 〇Sergei Manzhos¹ (1.Ntl Uni of Singapore)

1:30 PM - 3:30 PM

[11p-PA3-5] Evaluation of Si-NW µ-TEG with metal/insulator multilayered conductive films

〇Shuhei Hirao¹, Ryo Yamato¹, Tianzhuo Zhan¹, Mao Xu¹, Hiroki Takezawa¹, Kohei Mesaki¹, Motohiro Tomita¹, Yibin Xu², Takanobu Watanabe¹ (1.Waseda Univ., 2.NIMS)

1:30 PM - 3:30 PM

[11p-PA3-6] Free-standing silicon coated aligned CNT sheet for lithium ion battery anode

〇Ryosuke Goto¹, Tomoya Asao¹, Motoyuki Karita¹, Takayuki Nakano¹, Yasutaka Tanaka¹, Yoku Inoue¹ (1.Shizuoka Univ.)

1:30 PM - 3:30 PM

[11p-PA3-7] Development of high performance Pt nanoporous electrocatalyst Ⅱ

〇Takamasa Kaito¹, Shota Seki¹, Keiji Noine¹, Noriaki Asakura¹, Tetsuya Jozuka¹, Toshihiko Matsuda¹ (1.KRI Inc.)

1:30 PM - 3:30 PM

[11p-PA3-8] Operation Tests of Electric Vehicle Running by Magnesium-Air Battery

〇Jun Saitoh¹, Hiroyuki Obara² (1.Tamagawa Univ., 2.Tamagawa Univ. TSCP)

1:30 PM - 3:30 PM

▲ [11p-PA3-9] Electric-Field Assisted Perovskite Crystallization for High-Performance Solar Cells

〇(D)CONGCONG ZHANG¹, Hiroyuki Okada¹ (1.Univ. of Toyama)

1:30 PM - 3:30 PM

[11p-PA3-10] Study on Synthesis and Evaluation of β-type Iron Silicide by Mechanical Alloying

〇Kou Nagata¹, Yuuki Sato¹, Shinzo Yoshikado¹ (1.Doshisha Univ.)

Sessions

1 Interdisciplinary Physics and Related Areas of Science and Technology » 1.4 Energy conversion, storage, resources and environment

[9p-S321-1~15] 1.4 Energy conversion, storage, resources and environment

[9p-S321-1] Development of carbonate hydrogen storage material

[9p-S321-2] Measurement of specific surface area of pearl powder by hydrogen adsorption

[9p-S321-3] Synergic Effects of Heavy Ion Irradiation and Surface Chemistry Processing for Hydrogen Absorption Functionally Improvement

[9p-S321-4] H Adsorption on Cs/W(110): H-induced Cs Desorption

▲ [9p-S321-5] Radiation graft copolymerization of phosphorous containing monomer on CMC-based hydrogel for metal adsorption

[9p-S321-6] Hydrogen occlusion mechanism and application to hydrogen sensor of Au - Pd alloy

▲ [9p-S321-7] Hydrogen generation by water splitting using TiO₂ and 3C-SiC in tandem structure

▲ [9p-S321-8] Electrodeposition of nanostructured Si-layer on graphite substrate for application as anode-materials in lithium-ion-battery

△ [9p-S321-9] Realization of an efficient CO₂ reduction using an optical near-field assisted excitation of dipole-forbidden transition

[9p-S321-10] Synthesis of Iron Disilicide/SiC Composite Powder for Water Splitting

[9p-S321-11] Air bio-battery with glucose-driven O₂ charger

[9p-S321-12] Theory on Electrode Over Potential of All-Solid Electrochemical Energy Device

[9p-S321-13] Analysis of the reaction mechanism of a bismuth fluoride electrode for fluoride shuttle battery

[9p-S321-14] Fabrication of semiconductor solid state battery with quantum well structure and evaluation of charge/discharge characteristics

[9p-S321-15] Morphology changes of SiO_x film anodes in different oxygen contents for lithium-ion batteries

[11p-PA3-1~10] 1.4 Energy conversion, storage, resources and environment

[11p-PA3-1] Photorechargeable properties of WO₃/FTO core-sheath nanofibers

[11p-PA3-2] Application of Ce-doped BiFeO₃ thin film to photoelectric conversion in photorechargeable battery

[11p-PA3-3] Integration of Bacteria using Light-Induced Convection and Application to Microbial Fuel Cells

▲ [11p-PA3-4] Lithium, Sodium and Magnesium Insertion in Brookite TiO₂: a Comparative Computational Study

[11p-PA3-5] Evaluation of Si-NW µ-TEG with metal/insulator multilayered conductive films

[11p-PA3-6] Free-standing silicon coated aligned CNT sheet for lithium ion battery anode

[11p-PA3-7] Development of high performance Pt nanoporous electrocatalyst Ⅱ

[11p-PA3-8] Operation Tests of Electric Vehicle Running by Magnesium-Air Battery

▲ [11p-PA3-9] Electric-Field Assisted Perovskite Crystallization for High-Performance Solar Cells

[11p-PA3-10] Study on Synthesis and Evaluation of β-type Iron Silicide by Mechanical Alloying

Authentication

Sessions

1 Interdisciplinary Physics and Related Areas of Science and Technology » 1.4 Energy conversion, storage, resources and environment

[9p-S321-1~15] 1.4 Energy conversion, storage, resources and environment

▲ [9p-S321-5] Radiation graft copolymerization of phosphorous containing monomer on CMC-based hydrogel for metal adsorption

▲ [9p-S321-7] Hydrogen generation by water splitting using TiO2 and 3C-SiC in tandem structure

▲ [9p-S321-8] Electrodeposition of nanostructured Si-layer on graphite substrate for application as anode-materials in lithium-ion-battery

△ [9p-S321-9] Realization of an efficient CO2 reduction using an optical near-field assisted excitation of dipole-forbidden transition

[11p-PA3-1~10] 1.4 Energy conversion, storage, resources and environment

▲ [11p-PA3-4] Lithium, Sodium and Magnesium Insertion in Brookite TiO2: a Comparative Computational Study

▲ [11p-PA3-9] Electric-Field Assisted Perovskite Crystallization for High-Performance Solar Cells

Authentication

▲ [9p-S321-7] Hydrogen generation by water splitting using TiO₂ and 3C-SiC in tandem structure

△ [9p-S321-9] Realization of an efficient CO₂ reduction using an optical near-field assisted excitation of dipole-forbidden transition

▲ [11p-PA3-4] Lithium, Sodium and Magnesium Insertion in Brookite TiO₂: a Comparative Computational Study