Oral presentation

[13p-A403-1~13] 1.4 Energy conversion, storage, resources and environment

Fri. Mar 13, 2020 1:15 PM - 4:45 PM A403 (6-403)

Kazuya Oguri(Tokai Univ.), Katsushi Fujii(RIKEN)

△：Presentation by Applicant for JSAP Young Scientists Presentation Award
▲：English Presentation
▼：Both of Above
No Mark：None of Above

+Add all to schedule

1:15 PM - 1:30 PM

[13p-A403-1] Investigation of the size dependence of the nanostructures for highly efficient CO₂ reduction with a near-field excitation

〇Yosuke Suzuki¹, Yuki Nakamura¹, Tatsuki Morimoto², Yuma Kato³, Muneaki Yamamoto³, Tomoko Yoshida³, Nobuyuki Shimizu⁴, Yuki Kataoka⁴, Yuichi Negishi⁴, Kenji Iida⁵, Katsuyuki Nobusada⁵, Takashi Yatsui¹ (1.Univ. of Tokyo, 2.Tokyo Univ. of Tech., 3.Osaka City Univ., 4.Tokyo Univ. of Science, 5.Inst. for Molecular Science)

1:30 PM - 1:45 PM

[13p-A403-2] Conditions Affecting the Element Adsorption Capacities of Acrylamide Gel Polymerized by γ-Ray Irradiation

Mizuki Kikutsugi¹, Hirotaka Okabe¹, Yoshiki Hidaka¹, 〇Kazuhiro Hara¹ (1.Kyushu Univ.)

1:45 PM - 2:00 PM

[13p-A403-3] Scanning Spreading Resistance Microscopy: A Promising Tool for Probing the Reaction Interface of Li-Ion Battery Materials

〇Mitsunori Kitta¹, Chie Fukada¹ (1.AIST)

2:00 PM - 2:15 PM

[13p-A403-4] Synthesis of Iron Disilicide/TiO₂ Composite Powder for Water Splitting

〇Kensuke Akiyama^1,2, Ryo Takahashi¹, Yu Motoizumi¹, Hiroshi Funakubo², Hiroshi Irie³ (1.Kanagawa Inst. Ind. Sci. Tech., 2.Tokyo Inst. Tech, 3.Univ. of Yamanashi)

2:15 PM - 2:30 PM

△ [13p-A403-5] Theoretical Study of Surface Dependent Electronic Structures of Electrocatalysts

〇Yuki Sakamoto¹, Yusuke Noda², Kaoru Ohno³, Kayo Koike¹, Katsushi Fujii¹, Tomiko Suzuki⁴, Takeshi Morikawa⁴, Shinichiro Nakamura¹ (1.RIKEN, 2.Nagoya Univ., 3.Yokohama National Univ., 4.Toyota Central R&D Labs)

2:30 PM - 2:45 PM

[13p-A403-6] Energy transducing system from single heat source with directionality effect

〇Masaki Kudo¹, Shokiku Kudo² (1.Infineon Japan, 2.No affiliation)

3:00 PM - 3:15 PM

[13p-A403-7] Hydrogen evolution by silicon quantum dot photocatalyst

〇Miho Takada¹, Hiroshi Sugimoto¹, Minoru Fujii¹ (1.Kobe Univ.)

3:15 PM - 3:30 PM

[13p-A403-8] Measurement of specific surface area and total pore volume of nanoporous carbon using hydrogen adsorption

〇(D)HENG LI¹, Keiji Komatsu¹, Hidetoshi Saitoh¹, Yoshinori Tsuda² (1.Nagaoka Univ. Tech., 2.Fuse Technonet)

3:30 PM - 3:45 PM

[13p-A403-9] Structural Analysis of Water Absorbed Nanoporous Carbon

〇Motoaki Yamazaki¹, Heng Li¹, Keiji Komatsu¹, Hidetoshi Saitoh¹, Yoshinori Tsuda² (1.Nagaoka Univ. Tech., 2.Fuse Technonet)

3:45 PM - 4:00 PM

[13p-A403-10] Deproteinization of Pearl Powder Using Sodium Hydroxide and Heating Processes

〇(D)HENG LI¹, Yunosuke Takatoku¹, Keiji Komatsu¹, Atsushi Nakamura^2,1, Osamu Ito², Keiki Nambu³, Hidetoshi Saitoh¹ (1.Nagaoka Univ. Tech., 2.Chubu Chelest Co.Ltd, 3.ACCHE Corporation)

4:00 PM - 4:15 PM

[13p-A403-11] Hydrogen adsorption characteristics and structural analysis of Akoya-Pearl-Oyster nacre powder

〇HENG LI¹, Yunosuke Takatoku¹, Keiji Komatsu¹, Atsushi Nakamura^2,1, Osamu Ito², Keiki Nambu³, Hidetoshi Saitoh¹ (1.Nagaoka Univ. Tech., 2.Chubu Chelest Co.Ltd, 3.ACCHE Corporation)

4:15 PM - 4:30 PM

▲ [13p-A403-12] Colloidal PbS quantum dot sensitized NIR-to-visible photon upconversion via triplet-triplet annihilation

〇Neeti Tripathi¹, Kenji Kamada¹, Masanori Ando², Tomoko Akai¹ (1.IFMRI, AIST, 2.BMRI, AIST)

4:30 PM - 4:45 PM

[13p-A403-13] Oxygen non-stoichiometry controlled homointerface structure MIIM diode for optical rectenna (II)

Daisuke Matsuura¹, 〇Makoto Shimizu¹, Hiroo Yugami¹ (1.Tohoku Univ.)

Poster presentation

[13a-PB1-1~9] 1.4 Energy conversion, storage, resources and environment

Fri. Mar 13, 2020 9:30 AM - 11:30 AM PB1 (PB)

△：Presentation by Applicant for JSAP Young Scientists Presentation Award
▲：English Presentation
▼：Both of Above
No Mark：None of Above

+Add all to schedule

9:30 AM - 11:30 AM

▲ [13a-PB1-1] Piezoelectric PZT thin-film transformers with a ring-dot structure

〇(P)SangHyo Kweon¹, Kazuki Tani¹, Isaku Kanno¹ (1.Department of Mechanical Engineering, Kobe University)

9:30 AM - 11:30 AM

[13a-PB1-2] Cross-sectional shape of channel of Lorentz-force type separator and separation performance for fish egg

Shinobu Azuma¹, 〇Teruhiko Akazawa¹, Yuji Iwamoto¹, Tamiki Umeda¹ (1.Kobe University)

9:30 AM - 11:30 AM

[13a-PB1-3] Characteristics of polymer electrolyte fuel cells with Ca₁₂Al_14-xSi_xO₃₂Cl_2+x catalysts

〇Kazuya Hiroshima¹, Tatsuki Momose¹, Noboru Wada¹ (1.Toyo Univ.)

9:30 AM - 11:30 AM

[13a-PB1-4] Raman scattering from Ca₁₂Al_14-xSi_xO₃₂Cl_2+x (0 ≤ x ≤ 3.4)

〇Tatsuki Momose¹, Kazuya Hiroshima¹, Noboru Wada¹ (1.Toyo Univ.)

9:30 AM - 11:30 AM

[13a-PB1-5] Evaluation of Ionomer Behavior on Catalyst - Support Using Impedance Analysis

〇Keiji Noine¹, Seki Shota¹, Tetsuya Jozuka¹, Takamasa Kaito¹, Noriaki Asakur¹, Toshihiko Matsuda¹ (1.KRI Inc.)

9:30 AM - 11:30 AM

[13a-PB1-6] Improvement of cycle performance of Si negative electrodes by fluorinated polymer coating for lithium-ion batteries

〇Masakazu Haruta¹, Hiroto Konaga¹, Akira Tomita², Toshio Takenaka², Takayuki Doi¹, Minoru Inaba¹ (1.Doshisha Univ., 2.OIKE & Co., Ltd.)

9:30 AM - 11:30 AM

[13a-PB1-7] Investigation of the Li⁺ insertion into the ε-Fe₂O₃ nanoparticles and its properties.

〇Sou Yasuhara¹, Yosuke Hamasaki², Takahiro Ao³, Yoshiyuki Inaguma³, Hajime Hojo⁴, Shintaro Yasui¹, Mitsuru Itoh¹ (1.Tokyo Tech., 2.National Defense Academy, 3.Gakushuin University, 4.Kyushu University)

9:30 AM - 11:30 AM

[13a-PB1-8] Power generation characterics of contact separation type TENG using PDMS / Al

〇Kaito Koshiji¹, Hiroki Kokubo¹, Kazuki Takahashi¹, Takashi Ikuno¹ (1.Tokyo Univ. of Sci.)

9:30 AM - 11:30 AM

[13a-PB1-9] Prototype of Mechanical Rechargeable Magnesium-Air Battery

〇Jun Saitoh¹, Hiroyuki Obara² (1.Tamagawa Univ., 2.Tamagawa Univ. TSCP)

Sessions

1 Interdisciplinary Physics and Related Areas of Science and Technology » 1.4 Energy conversion, storage, resources and environment

[13p-A403-1~13] 1.4 Energy conversion, storage, resources and environment

[13p-A403-1] Investigation of the size dependence of the nanostructures for highly efficient CO₂ reduction with a near-field excitation

[13p-A403-2] Conditions Affecting the Element Adsorption Capacities of Acrylamide Gel Polymerized by γ-Ray Irradiation

[13p-A403-3] Scanning Spreading Resistance Microscopy: A Promising Tool for Probing the Reaction Interface of Li-Ion Battery Materials

[13p-A403-4] Synthesis of Iron Disilicide/TiO₂ Composite Powder for Water Splitting

△ [13p-A403-5] Theoretical Study of Surface Dependent Electronic Structures of Electrocatalysts

[13p-A403-6] Energy transducing system from single heat source with directionality effect

[13p-A403-7] Hydrogen evolution by silicon quantum dot photocatalyst

[13p-A403-8] Measurement of specific surface area and total pore volume of nanoporous carbon using hydrogen adsorption

[13p-A403-9] Structural Analysis of Water Absorbed Nanoporous Carbon

[13p-A403-10] Deproteinization of Pearl Powder Using Sodium Hydroxide and Heating Processes

[13p-A403-11] Hydrogen adsorption characteristics and structural analysis of Akoya-Pearl-Oyster nacre powder

▲ [13p-A403-12] Colloidal PbS quantum dot sensitized NIR-to-visible photon upconversion via triplet-triplet annihilation

[13p-A403-13] Oxygen non-stoichiometry controlled homointerface structure MIIM diode for optical rectenna (II)

[13a-PB1-1~9] 1.4 Energy conversion, storage, resources and environment

▲ [13a-PB1-1] Piezoelectric PZT thin-film transformers with a ring-dot structure

[13a-PB1-2] Cross-sectional shape of channel of Lorentz-force type separator and separation performance for fish egg

[13a-PB1-3] Characteristics of polymer electrolyte fuel cells with Ca₁₂Al_14-xSi_xO₃₂Cl_2+x catalysts

[13a-PB1-4] Raman scattering from Ca₁₂Al_14-xSi_xO₃₂Cl_2+x (0 ≤ x ≤ 3.4)

[13a-PB1-5] Evaluation of Ionomer Behavior on Catalyst - Support Using Impedance Analysis

[13a-PB1-6] Improvement of cycle performance of Si negative electrodes by fluorinated polymer coating for lithium-ion batteries

[13a-PB1-7] Investigation of the Li⁺ insertion into the ε-Fe₂O₃ nanoparticles and its properties.

[13a-PB1-8] Power generation characterics of contact separation type TENG using PDMS / Al

[13a-PB1-9] Prototype of Mechanical Rechargeable Magnesium-Air Battery

Authentication