〇Linghao Xiao¹, Yukari Shiwaku¹, Ryo Hamai¹, Kaori Tsuchiya¹, Keiichi Sasaki¹, Osamu Suzuki¹ (1. Tohoku University Graduate School of Dentistry (Japan))

〇Yun-Ru Huang¹, Shinn-Jyh Ding¹ (1. Chung Shan Medical University (Taiwan))

〇Minghao Zhou^1,2,3, Hongbo Wei^1,2,3 (1. State Key Laboratory of Military stomatologyDepartment of Oral Implants, School of stomatology, The Fourth Military Medical University (China), 2. National clinical research center for Oral Diseases & Shaanxi engineering research center for Dental Materials and advanced Manufacture (China), 3. Department of Oral Implants, School of stomatology, The Fourth Military Medical University (China))

〇Naoko Nakamura¹, Ruka Yamamoto¹, Itsuki Kogure¹, Tsuyoshi Kimura², Akio Kishida² (1. College of Systems Engineering and Science, Shibaura Institute of Technology (Japan), 2. Institute of Biomaterials and Bioengineering, Tokyo Medical and Dental University (Japan))

〇Dasmawati Mohamad¹, Wan Nur Fadilla Wan Hamad¹, Najian Athirah Abdullah¹ (1. School of Dental Sciences, Universiti Sains Malaysia (Malaysia))

〇Chengxiong Lin^1,2, Hongping Wan², Prashant Kumar Sharma², Botao Gao¹ (1. Guangdong Provincial Key Laboratory of Medical Electronic Instruments and Polymer Products, Guangdong Medical Device Research Institute (China), 2. University of Groningen and University Medical Center Groningen, Department of Biomedical Engineering (Netherlands))

〇Tomoko Ogasawara¹, Rei Kuwabara¹, Katsuyuki Kozai¹, Koichi Kato^1,2 (1. Graduate School of Biomedical and Health Sciences, Hiroshima University (Japan), 2. Research Institute for Nanodevice and Bio Systems, Hiroshima University (Japan))

〇Shoya Ono¹, Duc H.T. Le², Jin Nakamura^1,3, Chikara Ohtsuki¹, Ayae Sugawara-Narutaki¹ (1. Graduate School of Engineering, Nagoya University (Japan), 2. Department of Biomedical Engineering and Chemical Engineering, Eindhoven University of Technology (Netherlands), 3. Institute for Advanced Research, Nagoya University (Japan))

〇Tomonori Waku¹, Kaede Akita¹, Akio Kobori¹ (1. Faculty of molecular chemistry and engineering, Kyoto Institute of Technology (Japan))

〇Mako Kobayashi¹, Yoshihide Hashimoto¹, Jun Negishi², Hideki Saga³, Yoshihiro Sasaki⁴, Kazunari Akiyoshi⁴, Tsuyoshi Kimura¹, Akio Kishida¹ (1. Department of Material-based Medical Engineering, Institute of Biomaterials and Bioengineering, Tokyo Medical and Dental University (Japan), 2. Faculty of textile science and technology, Shinshu University (Japan), 3. KM biologics Co., Ltd. (Japan), 4. Graduate School of Engineering, Kyoto University (Japan))

〇Chia-Yu Ho¹, Tzu-Wei Wang¹ (1. Department of Materials Science and Engineering, National Tsing Hua University (Taiwan))

〇Shoma Muramatsu¹, Koki Tachibana², Yasuaki Tokudome², Akiko Obata¹, Toshihiro Kasuga¹ (1. Graduate School of Engineering, Nagoya Institute of Technology (Japan), 2. Graduate School of Engineering, Osaka Prefecture University (Japan))

〇Lili Hao¹, Hongli Mao¹, Peibiao Zhang², Zhongwei Gu¹ (1. Nanjing Tech University (China), 2. Changchun Institute of Applied Chemistry (China))

〇Jianmin YANG^1,2, Zibo ZHANG¹, Xianai SHI^1,2 (1. Fuzhou University (China), 2. Fujian Key Laboratory of Medical Instrument and Pharmaceutical Technology (China))

〇HUE THI LE¹, Kyoko Fukazawa¹, Sunao Matsui^1,2, Takeshi Nagasaki², Atsushi Mahara¹, Tetsuji Yamaoka¹ (1. Department of Biomedical Engineering, National Cerebral and Cardiovascular Center Research Institute (Japan), 2. Department of Graduate School of Engineering, Osaka City University (Japan))

〇Yan Xie^1,2, Naoki Kawazoe², Toru Yoshitomi ², Guoping Chen^1,2 (1. University of Tsukuba (Japan), 2. National Institute for Materials Science (Japan))

〇Isha - Goel¹, Makoto Noiri¹, Yuka Yamauchi², Koichi Kato², Yuji Teramura^3,4 (1. Department of Bioengineering, Graduate School of Engineering, The University of Tokyo (Japan), 2. Department of Biomaterials, Graduate School of Biomedical and Health Sciences, Hiroshima University (Japan), 3. Cellular and Molecular Biotechnology Research Institute (CMB), National Institute of Advanced Industrial Science and Technology (AIST) (Japan), 4. Department of Immunology, Genetics and Pathology (IGP), Uppsala University (Sweden))

〇Atsushi Tsuyukubo^1,2, Kimio Sumaru², Kana Morishita², Toshiyuki Kanamori^1,2 (1. School of Integrative and Global Majors, University of Tsukuba (Japan), 2. Cellular and Molecular Biotechnology Research Institute, National Institute of Advanced Industrial Science and Technology (Japan))

〇Yoshiaki Hirano^1,2, Ikumi Amimoto¹, Yudai Futaki¹ (1. Faculty of Chemistry, Materials and Bioengineering, Kansai University (Japan), 2. Kansai University Medical Polymer Research Center, Kansai University, (Japan))

〇Jun Kobayashi¹, Hyukjin Lee², Masayuki Yamato¹, Teruo Okano¹ (1. Institute of Advanced Biomedical Engineering and Science, Tokyo Women's Medical University (Japan), 2. College of Pharmacy, Ewha Womans University (Korea))

〇Masamichi Nakayama¹, Junichi Tonegawa², Akihiko Kikuchi², Teruo Okano¹ (1. Institute of Advanced Biomedical Engineering and Science, Tokyo Women's Medical University (Japan), 2. Faculty of Advanced Engineering, Tokyo University of Science (Japan))

〇Xiaomeng LI^1,2, Kexin Nie^1,2, Shanshan Han^1,2, Jianmin Yang ³, Qingqing Sun⁴, Xiaofeng Wang^1,2, Qian Li^1,2 (1. School of Mechanics and Safety Engineering, Zhengzhou University (China), 2. National Center for International Joint Research of Micro-nano Moulding Technology, Zhengzhou University (China), 3. College of Biological Science and Engineering, Fuzhou University (China), 4. Center for Functional Sensor and Actuator, National Institute for Materials Science (Japan))

〇Yasuhiro Nakagawa¹, Kenta Matsumoto¹, Toshiyuki Ikoma¹ (1. School of Materials and Chemical Technology, Tokyo Institute of Technology (Japan))

〇Hsin Ting Lee¹, Akon Higuchi^1,2 (1. Chemical and Material Engineering department, National Central University (Taiwan), 2. Riken Cluster for Pioneering Research, RIKEN, Wako, Saitama (Japan))

〇Xiupeng Wang¹, Xia Li¹, Atsuo Ito¹ (1. National Institute of Advanced Industrial Science and Technology (Japan))

〇Xiupeng Wang¹, Xia Li¹, Atsuo Ito¹, Noriko M Tsuji¹ (1. National Institute of Advanced Industrial Science and Technology (Japan))

〇AILIFEIRE FULATI^1,2, Koichiro Uto¹, Miho Watanabe³, Mitsuhiro Ebara^1,2,4 (1. Research Center for Functional Materials (RCFM), National Institute for Materials Science (NIMS) (Japan), 2. Graduate School of Science and Technology, University of Tsukuba (Japan), 3. Department of Pediatric Surgery, Osaka University (Japan), 4. Graduate School of Advanced Engineering, Tokyo University of Science (Japan))

〇Akari Tasaki^1,2, Yihua Liu², Mitsuhiro Ebara^1,2,3 (1. Degree of Programs in Pure and Applied Sciences, University of Tsukuba (Japan), 2. Research Center for Functional Materials, National Institute for Materials Science (Japan), 3. Department of Materials Science and Technology, Tokyo University of Science (Japan))

〇Takanatsu Hosokawa¹, Kazuki Yuzuriha¹, Akihiro Kishimura^1,2, Takeshi Mori^1,2, Yoshiki Katayama^1,2 (1. Graduate School of Systems Life Sciences, Kyushu University (Japan), 2. Department of Applied Chemistry, Faculty of Engineering, Kyushu University (Japan))

〇Nishant Kumar¹, Robin Rajan¹, Kazuaki Matsumura¹ (1. Japan Advanced Institute Of Science and Technology (Japan))

〇Mimi Wan¹, Qi Wang¹, Huan Chen¹, Zhiyong Liu¹, Chun Mao¹, Jian Shen¹ (1. Nanjing Normal University (China))