Oral presentation

11 Superconductivity » 11.4 Analog applications and their related technologies

[6p-S43-1~21] 11.4 Analog applications and their related technologies

Wed. Sep 6, 2017 1:15 PM - 7:15 PM S43 (Conf. Room 3)

Toshihiko Kiwa(Okayama Univ.), Shigehito Miki(NICT), Tohru Taino(Saitama Univ.), Saburo Tanaka(Toyohashi Univ. Tech.)

△：奨励賞エントリー
▲：英語発表
▼：奨励賞エントリーかつ英語発表
空欄：どちらもなし

+Add all to schedule

1:15 PM - 1:30 PM

[6p-S43-1] Trial fabrication of eddy current testing system using HTS-SQUID on a hand card for detection of fatigue cracks of steel deck plate

〇Akira Tsukamoto¹, Hato Tsunehiro¹, Adachi Seiji¹, Oshikubo Yasuo¹, Tsukada Keiji², Tanabe Keiichi¹ (1.SUSTERA, 2.OkayamaUniv.)

1:30 PM - 1:45 PM

[6p-S43-2] Design method of liquid nitrogen cryostat for HTS-SQUID system

〇Tsunehiro Hato¹, Keiichi Tanabe¹ (1.SUSTERA)

1:45 PM - 2:00 PM

△ [6p-S43-3] Bio substance detection in liquid phase using magnetic marker Ⅱ

〇Yoshitsugu Takafuji¹, Kouta Irie¹, Kazuki Akiyoshi¹, Keizi Enpuku¹ (1.Kyushu Univ.)

2:00 PM - 2:15 PM

△ [6p-S43-4] Three-dimensional Imaging of Magnetic Nanoparticles Using Multiple Pickup Coils

〇Masahiro Muta¹, Shohei Hamanaga¹, Naoki Tanaka¹, Teruyoshi Sasayama¹, Keiji Enpuku¹ (1.Kyushu Univ.)

2:15 PM - 2:30 PM

△ [6p-S43-5] High sensitivity analysis of the magnetization properties of magnetic nanoparticles changed by the different solvent using HTS-SQUID

〇Ryota Isshiki¹, Yuta Nakamura¹, Shun Takeuchi¹, Tetsuro Hirata¹, Kayo Fujimoto¹, Kenji Sakai¹, Toshihiko Kiwa¹, Keiji Tsukada¹ (1.Okayama Univ.)

2:30 PM - 2:45 PM

△ [6p-S43-6] Magnetic response characteristics of magneto-resistive sensors with superconducting magnetic focusing thin film

〇Tetsuro Hirata¹, Yoshihiro Nakamura¹, Yatsuse Majima¹, Kaoru Amano¹, Kenji Sakai¹, Toshihiko Kiwa¹, Keiji Tsukada¹ (1.Okayama Univ.)

3:00 PM - 3:15 PM

[6p-S43-7] Stable Production of SmBCO Films by Off-axis Sputtering Method

〇Seiji Adachi¹, Keiichi Tanabe¹ (1.SUSTERA)

3:15 PM - 3:30 PM

[6p-S43-8] Digital flux-locked loop system equipped with sub-sampling technique for high-Tc rf-SQUID controlled by magnetic flux modulation

〇Yuji Miyato¹, Kazuki Watanabe¹, Hideo Sato-Akaba¹ (1.Osaka Univ.)

3:30 PM - 3:45 PM

[6p-S43-9] Improvement of system noise in SQUID magnetometer system for geomagnetic measurement and observation results

〇Jun Kawai¹, Mazakazu Miyamoto¹, Miki Kawabata¹, Yasuhiro Haruta¹, Gen Uehara¹ (1.AEL-KIT)

3:45 PM - 4:00 PM

[6p-S43-10] Reduction of artifacts caused by electromagnetic wave in MEG measurements

〇Masanori Higuchi¹, Daisuke Oyama¹, Yasuhiro Haruta¹, Gen Uehara¹ (1.Applied Electronics Lab. KIT)

4:00 PM - 4:15 PM

△ [6p-S43-11] Study on 2D-MPI System using Bucking Coil for Compensation

〇Kazuya Kobayashi¹, Yusaku Sanada¹, Keita Nakashima¹, Seiichiro Ariyoshi¹, Saburo Tanaka¹ (1.Toyohashi Univ. of Techol.)

4:15 PM - 4:30 PM

△ [6p-S43-12] Study on Ultra-low Field HTS-SQUID MRI System

〇Moriki Kabasawa¹, Kazuma Demachi¹, Seiichiro Ariyoshi¹, Saburo Tanaka¹ (1.Toyohashi Univ. of Technol.)

4:45 PM - 5:00 PM

[6p-S43-13] Design and evaluation of 40 MHz superconducting detection coil for solid state NMR

〇(M1)Haruki Hoshi¹, Kotaro Irie¹, Masato Takahashi², Shota Kato², Shigetoshi Ohshima¹, Atsushi Saito¹ (1.yamagata Univ., 2.RIKEN)

5:00 PM - 5:15 PM

[6p-S43-14] Design of transimitting filter using cascaded quadruplet 8-pole superconducting bulk resonator

〇(M1)Shun Kodama¹, Takafumi Saito¹, Shigetoshi Ohshima¹, Atsushi Saito¹ (1.Yamagata Univ.)

5:15 PM - 5:30 PM

[6p-S43-15] Two dimensional imaging of terahertz waves using Spiral-MKIDs

〇(M1)Daisuke Kurashina¹, Naoki Mikami¹, Kensuke Nakajima¹, Atsushi Saito¹ (1.Yamagata Univ.)

5:30 PM - 5:45 PM

[6p-S43-16] Development and evaluation of TiN/Ti Multi Layer KIDs for the observation of the CMB polarization

〇Munehisa Semoto¹, Satoru Mima², Kenji Kiuchi², Hiroaki Myoren¹, Masato Naruse¹, Chiko Otani^2,3, Osamu Tajima⁴, Shugo Oguri², Junya Suzuki⁴, Tohru Taino¹ (1.Saitama Univ, 2.RIKEN, 3.Tohoku Univ, 4.KEK)

5:45 PM - 6:00 PM

[6p-S43-17] Properties and analysis of superconducting resonators made of sputtered Al thin film

〇Takashi Noguchi¹, Agnes Dominjon¹, Yutaro Sekimoto¹ (1.NAOJ)

6:15 PM - 6:30 PM

[6p-S43-18] Fabrication and evaluation of tapered superconducting TSV for STJ detector using 3D integration technique

〇Kazusa Monzen¹, Soki Hatakeyama¹, Masato Naruse¹, Hiroaki Myoren¹, Masahiro Aoyagi², Tohru Taino¹ (1.Saitama Univ., 2.AIST)

6:30 PM - 6:45 PM

[6p-S43-19] Flip chip mounting technology of STJ detector using superconducting bump

〇Souki Hatakeyama¹, Hiroshi Nakagawa², Katsuya Kikuchi², Masahiro Aoyagi², Hiroaki Myoren¹, Tohru Taino¹ (1.Saitama Univ., 2.AIST)

6:45 PM - 7:00 PM

[6p-S43-20] Measurement of phonon diffusion length in a substrate using STJ

〇Yuma Sato¹, Masahiko Sone¹, Masato Naruse¹, Hiroaki Myoren¹, Yoshiaki Sasaki², Chiko Otani², Tohru Taino¹ (1.Saitama Univ., 2.RIKEN)

7:00 PM - 7:15 PM

[6p-S43-21] X-ray irradiation to STJ for neutron detector on Si-LBO hybrid substrate

〇Yuichi Fujisawa¹, So Endo¹, Go Fujii², Masahiro Ukibe², Yuichi Kurashima², Hideki Takagi², Masataka Ohkubo², Masato Naruse¹, Myoren Hiroaki¹, Chiko Otani³, Tohru Taino¹ (1.Saitama Univ., 2.AIST, 3.RIKEN)

Session information