〇Linawati Sutrisno^1,2, Huajian Chen^1,2, Toru Yoshitomi¹, Naoki Kawazoe¹, Guoping Chen^1,2 (1. National Institute for Materials Science (Japan), 2. University of Tsukuba (Japan))

〇Ning Zhang¹ (1. School of Biology, Food and Environment, Hefei University (China))

〇Zhengjia ZHU^1,2, Ruyue LI^1,2, Mingmao CHEN^1,2 (1. Fuzhou University (China), 2. Fujian Key Laboratory of Medical Instrument and Pharmaceutical Technology (China))

〇東郷 秀孝¹、寺田 堅斗²、廣瀬 祐大¹、中川 秀夫¹、武内 大輝²、楠 正暢¹ (1. 近畿大学大学院 生物理工学研究科 、2. 三重大学大学院 医学系研究科 )

〇ZHANG SHUNYAO¹、田村 篤志¹、由井 伸彦¹ (1. 東京医科歯科大学院 医歯学総合研究科 )

〇Jongmin Yum¹, Beob Soo Kim¹, Mitsuru Naito², Hyun Jin Kim³, Kanjiro Miyata¹ (1. Graduate School of Engineering, The University of Tokyo (Japan), 2. Graduate School of Medicine, The University of Tokyo (Japan), 3. College of Engineering, Inha University (Korea))

〇Kai Hiraga¹, Terumitsu Hasebe^1,2, Yuya Oyama¹, Shunsuke Kamei², Shota Yamamoto^1,2, Atsushi Hotta¹ (1. Department of Mechanical Engineering, Keio University (Japan), 2. Department of Radiology, Tokai University Hachioji Hospital, Tokai University School of Medicine (Japan))

〇Kenta Tanito¹, Hiroshi Tagawa¹, Teruki Nii^1,2, Akihiro Kishimura^1,2,3, Takeshi Mori^1,2, Yoshiki Katayama^1,2,3 (1. Graduate School of Systems Life Sciences, Kyushu University (Japan), 2. Department of Applied Chemistry, Graduate School of Engineering, Kyushu University (Japan), 3. International Research Center for Molecular Systems, Kyushu University (Japan))

〇Ting-Wei Yu¹, Ming-Yin Shen², Hsin-Cheng Chiu¹ (1. Department of Biomedical Engineering and Environmental Sciences, National Tsing Hua University (Taiwan), 2. Department of Surgery, China Medical University Hsinchu Hospital (Taiwan))

〇Chihiro Hiruno^1,2, Kyoko Fukazawa¹, Yuichi Ohya^2,3, Tetsuji Yamaoka¹ (1. Department of Biomedical Engineering, National Cerebral and Cardiovascular Center Research Institute (Japan), 2. Faculty of Chemistry, Materials and Bioengineering, Kansai University (Japan), 3. Collaborative Research Center for Engineering, Medicine and Pharmacology, Kansai University (Japan))

〇鈴木 聖也^1,2、李 誠鎬¹、加藤 且也¹、宮島 達也¹、鳴瀧 彩絵³、櫻井 誠²、永田 夫久江¹ (1. 産業技術総合研究所 、2. 中部大学大学院工学研究科応用化学専攻 、3. 名古屋大学工学研究科エネルギー理工学専攻 )

〇杉本 佳彦^1,2、李 誠鎬¹、加藤 且也¹、宮島 達也¹、櫻井 誠²、永田 夫久江¹ (1. 産業技術総合研究所 、2. 中部大学大学院工学研究科 )

〇Shuai Xu¹, Siyuan Chen (1. Nanjing Tech University (China))

〇Fernandez Francis¹、S Suresh ¹、Komath Manoj¹、Varma Harikrishna¹ (1. Sree Chitra Tirunal Institute for Medical Sciences & Technology (インド))

〇- ミャッ　エンダラ　スュエ¹、岩本 武夫²、馬目 佳信²、佐藤 慶介¹ (1. 東京電機大学工学研究科電気電子工学専攻 、2. 東京慈恵会医科大学 )

Shota Oyama¹, Aiko Yoshida², Kuon Kanazawa¹, Manami Urata¹, Yu Mikame¹, Tsuyoshi Yamamoto¹, Yusuke Ohba², 〇Asako Yamayoshi¹ (1. Nagasaki University (Japan), 2. Hokkaido University (Japan))

〇Jun Takebe¹, Atsushi Aoyagi¹, Masaki Hata¹, Ryohei Matsukawa¹, Yuka Imanishi¹, Toshiyuki Kobayashi¹ (1. Department of Removable Prosthodontics, School of Dentistry, Aichi Gakuin University (Japan))

〇山咲 茉名美¹、梅山 諒也¹、村瀬 敦郎²、大矢 裕一³ (1. 関西大学大学院理工学研究科 、2. 関西大学先端科学技術推進機構 、3. 関西大学メディカルポリマー研究センター )

〇奥野 陽太¹、西村 智貴²、佐々木 善浩¹、秋吉 一成¹ (1. 京都大学大学院工学研究科 、2. 信州大学大学院繊維学部 )

〇Suphatra Hiranphinyophat¹, Yasuhiko Iwasaki^1,2 (1. ORDIST, Kansai University, Japan (Japan), 2. Faculty of Chemistry, Materials and Bioengineering, Kansai University, Japan (Japan))

〇Harit Pitakjakpipop^1,2, Robin Rajan¹, Pakorn Opaprakasit², Paisan Khanchaitit³, Kazuaki Matsumura¹ (1. School of Materials Science, Japan Advanced Institute of Science and Technology (Japan), 2. Sirindhorn International Institute of Technology (Thailand), 3. National Nanotechnology Center (NANOTEC) (Thailand))

〇Jing Zhang¹ (1. Jiangsu University (China))

〇長瀬 健一¹、枝常 吾郎¹、金澤 秀子¹ (1. 慶應義塾大学薬学部 )

〇Raghav Soni¹, Yu-I Hsu¹, Hiroshi Uyama¹ (1. Department of Applied Chemistry, Graduate School of Engineering, Osaka University (Japan))

〇Robin Rajan¹, Nishant Kumar¹, Kazuaki Matsumura¹ (1. Japan Advanced Institute of Science and Technology (Japan))

〇Xianda Dai¹, Robin Rajan¹, Kazuaki Matsumura¹ (1. School of Materials Science, Japan Advanced Institute of Science and Technology (Japan))

〇Swati Sharma¹, Anil Mandhani², Suryasarathi Bose³, Bikramjit Basu¹ (1. Materials Research Centre, Indian Institute of Science Bangalore (India), 2. Urology and Kidney Transplant Institute, Medanta- The Medicity (India), 3. Department of Materials Engineering, Indian Institute of Science Bangalore (India))

〇飯田 彩乃¹、能﨑 優太²、村瀬 敦郎²、大矢 裕一^1,3 (1. 関西大学化学生命工学部 、2. 関西大学ORDIST 、3. KUMP-RC )

〇中澤 祐登¹、土肥 遼太¹、瀬古 文佳¹、安井 貴彦¹、村瀬 敦郎²、葛谷 明紀^1,3、大矢 裕一^1,3 (1. 関西大学化学生命工学部 、2. 関西大学先端科学技術推進機構 、3. 関西大学メディカルポリマー研究センター )

〇芦田 彩歌¹、眞弓 のぞみ¹、村瀬 敦郎²、大矢 裕一³ (1. 関西大学大学院理工学研究科 、2. 関西大学先端科学技術推進機構 、3. 関西大学メディカルポリマー研究センター )

〇LEE WON SEOK¹、榎本 孝文¹、秋元 文¹、吉田 亮¹ (1. 東京大学大学院工学研究科 )

〇MENG WEI¹, Yu-I Hsu¹, Taka-Aki Asoh¹, Moon-Hee Sung², Hiroshi Uyama¹ (1. Department of Applied Chemistry, Osaka University (Japan), 2. Department of Advanced Fermentation Fusion Science and Technology, Kookmin University (Korea))

〇Jiliang Song ¹, Yiyan He ², Zhongwei Gu ^1,2 (1. College of Materials Science and Engineering, Nanjing Tech University (China), 2. National Engineering Research Center, Sichuan University (China))

〇Iku Ota¹, Shunya Inukai¹, Naruki Kurokawa¹, Atsushi Hotta¹ (1. Department of Mechanical Engineering, Keio University (Japan))

〇Soumitra Das¹, Bikramjit Basu¹ (1. Indian Institute of Science, Bangalore (India))

〇Vidushi Sharma¹, Sheetal Chowdhary², Suryasarathi Bose³, Bikramjit Basu⁴ (1. PhD, Materials research centre, Indian Institute of Science, Bangalore (India), 2. Project assistant, Materials Research center, Indian Institute of Science (India), 3. Professor, Materials Engineering, Indian Institute of Science (India), 4. Professor, Materials research Centre, Indian Institute of Science (India))

〇Yu-Tang Chang¹, Akon Higuchi^2,1 (1. School of Engineering, National Central University (Taiwan), 2. Riken Cluster for Pioneering Research, RIKEN, Wako, Saitama, Japan (Japan))

〇Emilio Satoshi Hara¹, Masahiro Okada¹, Takayoshi Nakano², Takuya Matsumoto¹ (1. Okayama University, Graduate School of Medicine, Dentistry and Pharmaceutical Sciences (Japan), 2. Division of Materials and Manufacturing Science, Graduate School of Engineering, Osaka University (Japan))

〇原 正之¹、森 英樹¹ (1. 大阪府立大学大学院理学系研究科 )

Shao-Lun Tsao^1,2, Cheng-Xiang Ma², 〇Wen-Tyng Li² (1. Changhua Christian Hospital (Taiwan), 2. Chung Yuan Christian University (Taiwan))