〇シャオ リンハオ¹、塩飽 由香利¹、濱井 瞭¹、土屋 香織¹、佐々木 啓一¹、鈴木 治¹ (1. 東北大学大学院歯学研究科 )

〇Yun-Ru Huang¹, Shinn-Jyh Ding¹ (1. Chung Shan Medical University (Taiwan))

〇Minghao Zhou^1,2,3, Hongbo Wei^1,2,3 (1. State Key Laboratory of Military stomatologyDepartment of Oral Implants, School of stomatology, The Fourth Military Medical University (China), 2. National clinical research center for Oral Diseases & Shaanxi engineering research center for Dental Materials and advanced Manufacture (China), 3. Department of Oral Implants, School of stomatology, The Fourth Military Medical University (China))

〇中村 奈緒子¹、山本 琉加¹、小暮 一輝¹、木村 剛²、岸田 晶夫² (1. 芝浦工業大学システム理工学部 、2. 東京医科歯科大学生体材料工学研究所 )

〇Dasmawati Mohamad¹, Wan Nur Fadilla Wan Hamad¹, Najian Athirah Abdullah¹ (1. School of Dental Sciences, Universiti Sains Malaysia (Malaysia))

〇Chengxiong Lin^1,2, Hongping Wan², Prashant Kumar Sharma², Botao Gao¹ (1. Guangdong Provincial Key Laboratory of Medical Electronic Instruments and Polymer Products, Guangdong Medical Device Research Institute (China), 2. University of Groningen and University Medical Center Groningen, Department of Biomedical Engineering (Netherlands))

〇Tomoko Ogasawara¹, Rei Kuwabara¹, Katsuyuki Kozai¹, Koichi Kato^1,2 (1. Graduate School of Biomedical and Health Sciences, Hiroshima University (Japan), 2. Research Institute for Nanodevice and Bio Systems, Hiroshima University (Japan))

〇尾野 将也¹、Le Duc²、中村 仁^1,3、大槻 主税¹、鳴瀧 彩絵¹ (1. 名古屋大学大学院工学研究科 、2. アイントホーヘン工科大学生体医工学・化学工学科 (オランダ)、3. 名古屋大学高等研究院 )

〇和久 友則¹、秋田 楓¹、小堀 哲生¹ (1. 京都工芸繊維大学分子化学系 )

〇小林 真子¹、橋本 良秀¹、根岸 淳²、嵯峨 秀樹³、佐々木 善浩⁴、秋吉 一成⁴、木村 剛¹、岸田 晶夫¹ (1. 東京医科歯科大学 生体材料工学研究所 物質医工学分野 、2. 信州大学 繊維学部 応用生物科学科 、3. KMバイオロジクス株式会社 、4. 京都大学大学院 工学研究科 )

〇Chia-Yu Ho¹, Tzu-Wei Wang¹ (1. Department of Materials Science and Engineering, National Tsing Hua University (Taiwan))

〇Shoma Muramatsu¹, Koki Tachibana², Yasuaki Tokudome², Akiko Obata¹, Toshihiro Kasuga¹ (1. Graduate School of Engineering, Nagoya Institute of Technology (Japan), 2. Graduate School of Engineering, Osaka Prefecture University (Japan))

〇Lili Hao¹, Hongli Mao¹, Peibiao Zhang², Zhongwei Gu¹ (1. Nanjing Tech University (China), 2. Changchun Institute of Applied Chemistry (China))

〇Jianmin YANG^1,2, Zibo ZHANG¹, Xianai SHI^1,2 (1. Fuzhou University (China), 2. Fujian Key Laboratory of Medical Instrument and Pharmaceutical Technology (China))

〇HUE THI LE¹, Kyoko Fukazawa¹, Sunao Matsui^1,2, Takeshi Nagasaki², Atsushi Mahara¹, Tetsuji Yamaoka¹ (1. Department of Biomedical Engineering, National Cerebral and Cardiovascular Center Research Institute (Japan), 2. Department of Graduate School of Engineering, Osaka City University (Japan))

〇Yan Xie^1,2, Naoki Kawazoe², Toru Yoshitomi ², Guoping Chen^1,2 (1. University of Tsukuba (Japan), 2. National Institute for Materials Science (Japan))

〇Isha - Goel¹, Makoto Noiri¹, Yuka Yamauchi², Koichi Kato², Yuji Teramura^3,4 (1. Department of Bioengineering, Graduate School of Engineering, The University of Tokyo (Japan), 2. Department of Biomaterials, Graduate School of Biomedical and Health Sciences, Hiroshima University (Japan), 3. Cellular and Molecular Biotechnology Research Institute (CMB), National Institute of Advanced Industrial Science and Technology (AIST) (Japan), 4. Department of Immunology, Genetics and Pathology (IGP), Uppsala University (Sweden))

〇露久保 淳^1,2、須丸 公雄²、森下 加奈²、金森 敏幸^1,2 (1. 筑波大学大学院グローバル教育院 、2. 産業技術総合研究所細胞分子工学研究部門 )

〇平野 義明^1,2、網本 育史¹、二木 雄大¹ (1. 関西大学化学生命工学部 、2. 関大メディカルポリマー研究センター )

〇小林 純¹、Lee Hyukjin²、大和 雅之¹、岡野 光夫¹ (1. 東京女子医科大学先端生命医科学研究所 、2. 梨花女子大学校薬学部 (大韓民国))

〇中山 正道¹、利根川 純一²、菊池 明彦²、岡野 光夫¹ (1. 東京女子医科大学先端生命医科学研究所 、2. 東京理科大学先進工学部 )

〇Xiaomeng LI^1,2, Kexin Nie^1,2, Shanshan Han^1,2, Jianmin Yang ³, Qingqing Sun⁴, Xiaofeng Wang^1,2, Qian Li^1,2 (1. School of Mechanics and Safety Engineering, Zhengzhou University (China), 2. National Center for International Joint Research of Micro-nano Moulding Technology, Zhengzhou University (China), 3. College of Biological Science and Engineering, Fuzhou University (China), 4. Center for Functional Sensor and Actuator, National Institute for Materials Science (Japan))

〇中川 泰宏¹、松本 健汰¹、生駒 俊之¹ (1. 東京工業大学物質理工学院材料系 )

〇Hsin Ting Lee¹, Akon Higuchi^1,2 (1. Chemical and Material Engineering department, National Central University (Taiwan), 2. Riken Cluster for Pioneering Research, RIKEN, Wako, Saitama (Japan))

〇Xiupeng Wang¹, Xia Li¹, Atsuo Ito¹ (1. National Institute of Advanced Industrial Science and Technology (Japan))

〇Xiupeng Wang¹, Xia Li¹, Atsuo Ito¹, Noriko M Tsuji¹ (1. National Institute of Advanced Industrial Science and Technology (Japan))

〇AILIFEIRE FULATI^1,2, Koichiro Uto¹, Miho Watanabe³, Mitsuhiro Ebara^1,2,4 (1. Research Center for Functional Materials (RCFM), National Institute for Materials Science (NIMS) (Japan), 2. Graduate School of Science and Technology, University of Tsukuba (Japan), 3. Department of Pediatric Surgery, Osaka University (Japan), 4. Graduate School of Advanced Engineering, Tokyo University of Science (Japan))

〇Akari Tasaki^1,2, Yihua Liu², Mitsuhiro Ebara^1,2,3 (1. Degree of Programs in Pure and Applied Sciences, University of Tsukuba (Japan), 2. Research Center for Functional Materials, National Institute for Materials Science (Japan), 3. Department of Materials Science and Technology, Tokyo University of Science (Japan))

〇細川 尊夏¹、杠 和樹¹、岸村 顕広^1,2、森 健^1,2、片山 佳樹^1,2 (1. 九州大学大学院システム生命科学府 、2. 九州大学大学院工学研究院応用化学部門 )

〇Nishant Kumar¹, Robin Rajan¹, Kazuaki Matsumura¹ (1. Japan Advanced Institute Of Science and Technology (Japan))

〇Mimi Wan¹, Qi Wang¹, Huan Chen¹, Zhiyong Liu¹, Chun Mao¹, Jian Shen¹ (1. Nanjing Normal University (China))