16:45 〜 17:00
[2801-14-14] Separation of ceria based abrasive from ceria based glass polishing powder waste by liquid liquid extraction
司会（Chairman）：Dodbiba Gjergj（University of Tokyo）, Shuji Owada (Waseda University)
キーワード：liquid liquid extraction, ceria based abrasive, polishing powder, rare earth metals, separation and recycling
In the manufacture process of panel glass, ceria based abrasive is often used in chemical mechanical polishing to remove fine scratches caused by etching treatment. After polishing, a ceria based glass polishing powder waste containing ceria based abrasive and polished glass powder is produced. The waste is discarded into landfill nowadays. In order to promote the recycling of rare earth metal resources, it is necessary to recovery ceria based abrasive from ceria based glass polishing powder waste.
In this research, the separation of ceria based abrasive from ceria based glass polishing powder waste by liquid liquid extraction was studied. Kerosene was used as organic phase. The effects of pH and NaOL addition on the extracted fraction of ceria based abrasive and glass powder, as well as on the mutual separation of the two particles were investigated. Finally, the optimal separation conditions were applied to a ceria based glass polishing powder waste.
The results showed that with the addition of NaOL at pH ranging from 5 to 9, more than 90 % ceria based abrasive can be extracted to the kerosene phase whereas only 10 to 20 % glass powder was extracted. The optimal conditions for the mutual separation of ceria based abrasive and glass powder were obtained when 7.5 kg/ton NaOl was added at pH 7. Under these conditions, the grade and recovery of ceria based abrasive in the kerosene phase solids was 100 % and 98.3 %, respectively. After applying the same conditions to a ceria based glass polishing powder waste, the grade and recovery of that was more than 80 %.
In this research, the separation of ceria based abrasive from ceria based glass polishing powder waste by liquid liquid extraction was studied. Kerosene was used as organic phase. The effects of pH and NaOL addition on the extracted fraction of ceria based abrasive and glass powder, as well as on the mutual separation of the two particles were investigated. Finally, the optimal separation conditions were applied to a ceria based glass polishing powder waste.
The results showed that with the addition of NaOL at pH ranging from 5 to 9, more than 90 % ceria based abrasive can be extracted to the kerosene phase whereas only 10 to 20 % glass powder was extracted. The optimal conditions for the mutual separation of ceria based abrasive and glass powder were obtained when 7.5 kg/ton NaOl was added at pH 7. Under these conditions, the grade and recovery of ceria based abrasive in the kerosene phase solids was 100 % and 98.3 %, respectively. After applying the same conditions to a ceria based glass polishing powder waste, the grade and recovery of that was more than 80 %.
講演PDFファイルダウンロードパスワード認証
講演集に収録された講演PDFファイルのダウンロードにはパスワードが必要です。
現在有効なパスワードは、［資源・素材学会会員専用パスワード］です。
※［資源・素材学会会員専用パスワード］は【会員マイページ】にてご確認ください。（毎年１月に変更いたします。）
［資源・素材学会会員専用パスワード］を入力してください