Oral presentation

[7p-S43-1~17] 11.2 Thin and thick superconducting films, coated conductors and film crystal growth

Thu. Sep 7, 2017 1:30 PM - 6:15 PM S43 (Conf. Room 3)

Ryo Teranishi(Kyushu Univ.), Shuhei Funaki(Shimane Univ.), Yusuke Ichino(Nagoya Univ.)

△：奨励賞エントリー
▲：英語発表
▼：奨励賞エントリーかつ英語発表
空欄：どちらもなし

+Add all to schedule

1:30 PM - 1:45 PM

△ [7p-S43-1] Introduction of BaHfO₃ as Artificial Pinning Centers into SmBa₂Cu₃O_y Coated Conductors Fabricated in Vapor-Liquid-Solid Growth Mode

〇Shuya Tajiri¹, Yusuke Ichino¹, Yuji Tsuchiya¹, Ataru Ichinose², Yutaka Yoshida¹ (1.Nagoya Univ., 2.CRIEPI)

1:45 PM - 2:00 PM

△ [7p-S43-2] Changes in Shape of BaHfO₃ Nanorods in SmBa₂Cu₃O_y Thin Films Fabricated at Different Deposition Rates

〇Junichi Nishiyama¹, Yusuke Ichino¹, Yuji Tsuchiya¹, Ataru Ichinose², Yutaka Yoshida¹ (1.Nagoya Univ., 2.CRIEPI)

2:00 PM - 2:15 PM

[7p-S43-3] Effect of Deposition Parameters of PLD Method on Surface Diffusion Constant and Supersaturation of SmBCO Thin Films

〇Yusuke Ichino¹, Naoto Shimazaki¹, Yuji Tsuchiya¹, Yutaka Yoshida¹ (1.Nagoya University)

2:15 PM - 2:30 PM

[7p-S43-4] Preparation of BaHfO₃ doped GdBa₂Cu₃O_x thin films
by 100 Hz / PLD on IBAD substrate

〇Naoya Ogata¹, Jah Alok¹, Horide Tomoya¹, Matsumoto Kaname¹, Yoshida Yutaka², awaji satoshi³ (1.Kyushu Inst., 2.Nagoya Univ., 3.Tohoku Univ.)

2:30 PM - 2:45 PM

[7p-S43-5] Preparation of GdBa₂Cu₃O_X / BaHfO₃ superconducting thin films
by alternating-targets method

〇Takamasa Kimoto¹, Jah Alok¹, Tomoya Horide¹, Kaname Matsumoto¹ (1.Kyushu inst.)

2:45 PM - 3:00 PM

[7p-S43-6] Planarization of metal substrate surface by MOD method for fabrication of IBAD substrate

〇Tatsuya Shikita¹, Jah Alok¹, Tomoya Horide¹, Kaname Matsumoto¹ (1.Kyushu Inst.)

3:15 PM - 3:30 PM

△ [7p-S43-7] Improved superconducting properties of fluorine-free MOD YBCO films by Br-addition

〇Takanori Motoki^1,4, Shuhei Ikeda¹, Shin-ichi Nakamura¹, Toshiya Doi^2,4, Genki Honda³, Tatsuoki Nagaishi³, Jun-ichi Shimoyama^1,4 (1.Aoyama-Gakuin Univ., 2.Kyoto Univ., 3.SEI, 4.JST-ALCA)

3:30 PM - 3:45 PM

[7p-S43-8] Preparation of YBa₂Cu₃O_y films by MOD method in low oxygen partial pressure

〇Ryo Hamada¹, Jah Alok¹, Tomoya Horide¹, Kaname Matsumoto¹ (1.Kyushu Inst.)

3:45 PM - 4:00 PM

△ [7p-S43-9] Joints between GdBa₂Cu₃O_7-δ coated conductors by solid diffusion of the precursor

〇Tomohiro Miyajima¹, Ryo Teranishi¹, Yukio Sato¹, Kenji Kaneko¹, Miyuki Nakamura², Valery Petrykin², Sergey Lee² (1.Kyushu Univ., 2.SuperOx Japan)

4:00 PM - 4:15 PM

[7p-S43-10] Microstructure observation of joint interface between REBa₂Cu₃O_7-δ coated conductors

〇Ryo Teranishi¹, Tomohiro Miyajima¹, Yukio Sato¹, Kenji Kaneko¹, Miyuki Nakamura², Valery Petrykin², Sergey Lee² (1.Kyushu Univ., 2.SuperOx Japan)

4:15 PM - 4:30 PM

[7p-S43-11] Thickness Dependence of Resistivity in NbN Thin Films

〇Yoshito Sakakibara¹, Kyosuke Sano¹, Masamitsu Tanaka¹, Hiroyuki Akaike², Akira Fujimaki¹ (1.Nagoya Univ., 2.Daido Univ.)

4:30 PM - 4:45 PM

[7p-S43-12] Epitaxial growth of Nb thin films on SrTiO₃ single crystal substrates

〇Yuhei Shimizu¹, Hiroshi Takashima¹, Yoshiyuki Yoshida¹, Mitsuho Furuse¹ (1.AIST)

5:00 PM - 5:15 PM

[7p-S43-13] Fabrication of Fe Metal Substrate for YBCO Tape by Cold-Rolling and Annealing (5)

〇Daisuke Okai¹, Masatosh Yae¹, Atsushi Yamamoto¹, Toshiya Doi² (1.Univ. Hyogo, 2.Kyoto Univ.)

5:15 PM - 5:30 PM

[7p-S43-14] Microstructures of YBa₂Cu₃O_ythin films via conductive Nb-doped SrTiO₃ buffer layers
on textured Cu tapes

〇Ataru Ichinose^1,3, Hiroki Maeda², Katsutoshi Hirose², Kohta Yamaguchi², Shigeru Horii^2,3, Toshiya Doi² (1.CRIEPI, 2.Kyoto Univ., 3.JST-ALCA)

5:30 PM - 5:45 PM

[7p-S43-15] Controlling of superconducting properties in GdBa₂Cu₄O₈ films by modified hydroxide flux composition

〇Keisuke Soeda¹, Yugo Miyachi¹, Ryotaro Yamamoto¹, Shuhei Funaki¹, Yasuji Yamada¹ (1.Shimane Univ.)

5:45 PM - 6:00 PM

△ [7p-S43-16] Investigation of RE124–RE123 decomposition condition toward fabrication of high-performance RE123 film

〇YUGO MIYACHI¹, Shuhei Funaki¹, Keisuke Soeda¹, Yasuji Yamada¹ (1.Shimane Univ.)

6:00 PM - 6:15 PM

[7p-S43-17] Low-temperature fabrication of conductive buffer layer and REBCO layer by molten hydroxide method

〇Shuhei Funaki¹, Keisuke Soeda¹, Yasuhiro Kojima¹, Yasuji Yamada¹ (1.Shimane Univ.)

Sessions

11 Superconductivity » 11.2 Thin and thick superconducting films, coated conductors and film crystal growth

[7p-S43-1~17] 11.2 Thin and thick superconducting films, coated conductors and film crystal growth

△ [7p-S43-1] Introduction of BaHfO₃ as Artificial Pinning Centers into SmBa₂Cu₃O_y Coated Conductors Fabricated in Vapor-Liquid-Solid Growth Mode

△ [7p-S43-2] Changes in Shape of BaHfO₃ Nanorods in SmBa₂Cu₃O_y Thin Films Fabricated at Different Deposition Rates

[7p-S43-3] Effect of Deposition Parameters of PLD Method on Surface Diffusion Constant and Supersaturation of SmBCO Thin Films

[7p-S43-4] Preparation of BaHfO₃ doped GdBa₂Cu₃O_x thin films
by 100 Hz / PLD on IBAD substrate

[7p-S43-5] Preparation of GdBa₂Cu₃O_X / BaHfO₃ superconducting thin films
by alternating-targets method

[7p-S43-6] Planarization of metal substrate surface by MOD method for fabrication of IBAD substrate

△ [7p-S43-7] Improved superconducting properties of fluorine-free MOD YBCO films by Br-addition

[7p-S43-8] Preparation of YBa₂Cu₃O_y films by MOD method in low oxygen partial pressure

△ [7p-S43-9] Joints between GdBa₂Cu₃O_7-δ coated conductors by solid diffusion of the precursor

[7p-S43-10] Microstructure observation of joint interface between REBa₂Cu₃O_7-δ coated conductors

[7p-S43-11] Thickness Dependence of Resistivity in NbN Thin Films

[7p-S43-12] Epitaxial growth of Nb thin films on SrTiO₃ single crystal substrates

[7p-S43-13] Fabrication of Fe Metal Substrate for YBCO Tape by Cold-Rolling and Annealing (5)

[7p-S43-14] Microstructures of YBa₂Cu₃O_ythin films via conductive Nb-doped SrTiO₃ buffer layers
on textured Cu tapes

[7p-S43-15] Controlling of superconducting properties in GdBa₂Cu₄O₈ films by modified hydroxide flux composition

△ [7p-S43-16] Investigation of RE124–RE123 decomposition condition toward fabrication of high-performance RE123 film

[7p-S43-17] Low-temperature fabrication of conductive buffer layer and REBCO layer by molten hydroxide method

Authentication

Sessions

11 Superconductivity » 11.2 Thin and thick superconducting films, coated conductors and film crystal growth

[7p-S43-1~17] 11.2 Thin and thick superconducting films, coated conductors and film crystal growth

△ [7p-S43-1] Introduction of BaHfO3 as Artificial Pinning Centers into SmBa2Cu3Oy Coated Conductors Fabricated in Vapor-Liquid-Solid Growth Mode

△ [7p-S43-2] Changes in Shape of BaHfO3 Nanorods in SmBa2Cu3Oy Thin Films Fabricated at Different Deposition Rates

△ [7p-S43-7] Improved superconducting properties of fluorine-free MOD YBCO films by Br-addition

△ [7p-S43-9] Joints between GdBa2Cu3O7-δ coated conductors by solid diffusion of the precursor

△ [7p-S43-16] Investigation of RE124–RE123 decomposition condition toward fabrication of high-performance RE123 film

Authentication

△ [7p-S43-1] Introduction of BaHfO₃ as Artificial Pinning Centers into SmBa₂Cu₃O_y Coated Conductors Fabricated in Vapor-Liquid-Solid Growth Mode

△ [7p-S43-2] Changes in Shape of BaHfO₃ Nanorods in SmBa₂Cu₃O_y Thin Films Fabricated at Different Deposition Rates

△ [7p-S43-9] Joints between GdBa₂Cu₃O_7-δ coated conductors by solid diffusion of the precursor